Armchair Quarterbacking: PARA USA

I’ve never really been all that fond of Para Ordinance for various reasons.  However Para Ordinance became PARA USA, moved from Canada to the US, and have been working hard to forge their spot in the American Gun Culture.  Some years ago at a Media Range Day at SHOT Show, I browsed the offerings at PARA’s booth and was impressed with what I saw.  The gun was a very basic 1911 for Wild Bunch competition.  Nothing fancy, just very “GI” style.  Simple.  And good.  It was very good.  I shot several other 1911’s from other makers, but the one that stuck in my mind, even the one I liked the best, was the Para.  During SHOT I went to the PARA booth and looked at the pistol again.  It wasn’t a fluke… I really did like the gun.  It was at that moment when I realized that PARA USA is a company to take seriously.

Now it’s about 4 years later and PARA USA has continued to improve their guns.   They’ve made huge strides to the point that PARA USA is now one of my TOP 1911 Makers.     They are making some 1911’s I want to buy.  Not their whole product line… but close.  They can do a few simple things to really hit it out of the Ballpark.   Let’s take a look at PARA USA’s line up.

Let’s start at the top of their own roster and work down.  The Executive Carry.    The gun looks good, with a nice finish, nice grips, and that awesome bobtail.  But it has a 3″ barrel.   This is basically a full length grip, bobtailed, and an ultra compact barrel.  If this was a revolver, this would be the equivalent of S&W Magnum Grips on a Snub-Nose.  It makes no sense to me.  The grip frame is the hard part to conceal, not the barrel.  Bobtailing it is a nice touch, but if you are going to have an ultra compact barrel, give it an ultra compact grip frame as well.  At least an Officer’s length grip frame.  Bobtail that.  This gun is just a bit off because of the short snout.   Because of that, I wouldn’t buy this one.  However, if it was sporting a Commander length slide and barrel – I would.  A nice clean Lightweight Commander on a Bobtail frame is missing from PARA’s line up and it should fit right here in the EXECUTIVE category.   That’s 1 missing gun.

The other missing gun from the EXECUTIVE Category is the CCO configuration.  A Commander Length barrel and slide on an Officer’s frame.  Basically just the opposite of the PARA Executive they have right now.  Colt’s CCO was a breakthrough for concealed carry 1911’s.  SIG followed that pattern and hit a home run with it in the C3 and RCS models.  Smaller frame for easier concealment, and a nice length barrel that doesn’t give up much on ballistics and sight radius.  It NAILS it.  PARA doesn’t have a CCO type 1911, and they should.

Here’s one more gun to add to the Executive roster.  The LDA Officer… But with a standard 1911 trigger mechanism.  Not everyone likes an LDA Trigger in their 1911, but the Officer platform is a good one, and should be reflected in the Executive, Elite and Expert lines. One thing that the LDA has that I’d like in the Executive line is that front strap checkering.  That Lightweight Commander Bobtail – I’d like some fine checkering on the front strap.

I’m not going to comment on the Competition guns, because I think PARA nailed those as offerings and every competitive shooter I know would change things anyway to their own liking and everyone has a difference of opinion so you’ll never make everyone happy there.   But it’s a solid line as it is.

Now, for the Tactical side of things.  The Black Ops line.   Sharp.  I could buy one of these.   Wait a second here… How come the Black Ops 1911 Single Stack doesn’t have the Checkering like the Double Stack?  If this is to be a full featured combat oriented line, let’s not skimp on it.    Also, the Recon, your Commander length tactical gun.  Where’s the Single Stack version of the Recon?

While we’re talking Tactical, not all Tactical ops are Black Ops.  I’d like to see Tactical versions in OD Green and FDE (Flat Dark Earth).  Same guns, just not blacked out.  I know you’ve had them before, I sold them.  FDE the slide and frame, and use the regular black parts and grips for a nice contrast.  Would look very sharp.

Now on to the Elite Series.  The PARA Elite is a wide range of 1911’s that we can probably say is PARA’s main line.  Or at least it should be. My only hang up with the Elite Series is that they are using Fiber Optic Front Sight Posts on all but the Elite Pro.    The Elite Pro is one of my very favorite guns from PARA’s line up.  It hits all the right buttons.  Now, where is the Elite Pro Commander?  There’s another gun that’s missing from PARA’s line.   Another one is an Elite Bobtail Commander.   Again with Bobtail Commanders?  I know.  But still, my point is valid.  Ask Dan Wesson.

The ELITE LS HUNTER.  This gun is one that I’ve been waiting for… a 10mm Long Slide – I must have this.  Thank you for making this one!   Now, if you could just add 10mm options to a couple other Elite or Tactical guns, thank you.  And to keep up with STI – mayhaps a double stack version as well?

Reverse Two Tone.  I want to see more Two Toned guns, specifically in the “Reverse” scheme.  Light on bottom, dark on top.  Make a lightweight bobtail commander in 10mm, in reverse two tone – and you’ll have my order by the end of Oct.   Seriously.   I’ll order it through Blackstone Shooting Sports in Charlotte.  I’m not kidding.  I will.

The Expert line.  I’m giving you some Golf Claps over here.  Bravo… You have it nailed here.   Simple lines, no frills, and “No Gills”.  None of those forward slide serrations that ruin the lines of a handsome Government model.   THIS is the 1911 that I want the OTHER companies to make!   And PARA USA made it.    This makes me quite happy that I am moving to the town that makes it!   Can I get a black slide on that Stainless frame?  In a Commander?

The Warthog is listed under the Expert category… and that’s fine.  But remember what I said about the CCO?  A CCO Warthog…. Call it the “A-10” model, as in “A-10 Warthog“, the Infantryman’s favorite jet plane.  It would be the Goldilocks for concealed carry double stacked 1911’s.  The regular Warthog is just a bit too short in the snout for me.   I know it’s been popular, but trust me… a 4″ version would be even more so.  I could have sold twice as many, because that is what the most common remark about it was.   Springfield found this out when they made 4” versions of the XDS, as did SIG with the C3 and RCS.  That’s the configuration that is IDEAL for concealed carry.

That’s about it for PARA USA.   They are doing a really great job and I’m happy to see it.  They’ve come a long way and are now a great 1911 company!   Well done, PARA USA!!!   *Standing Ovation Here*

Scary Season.

Omen_ver4October is coming.  The Month of Scary Movies is almost here.  Time to turn the lights off and pull the blanket up to your chin.

The problem is what horror movie to watch?

I’ve not seen a really good new scary movie in a long time.   Some start out good, or at least interesting, and then go straight to “Pants on the Head Retarded”.

I hate jump scares.  If you are a Director, and you have to use them, you suck.  You suck, your script writer sucks, your producers suck.
Found Footage and Documentary type horrors are the worst.  They are as Cliche as the “It was all just a dream” dodge.  It was unique at one time, with the Blair Witch Project and now it’s just a crutch for the unimaginative.

Hollywood is all about doing Remakes… Either remaking older films, or remaking foreign films.  You know what?  If you are going to do a Docu-Footage Horror, don’t.  Do a Remake.  Because with as little artistic credibility as you are going to have, might as well emulate something actually good.

And if you do a Remake… I’m still going to hate you.   Hack.

So what movies are we going to watch this month?   I suggest the old classics.  Black and White.  My top pick?  The Omen.

 

 

 

Krav Maga Shooting Fail.

For those that don’t know… Krav Maga is the type of Martial Arts developed in Israel.  I don’t practice it myself, my preference being Shotokan.  Since I don’t practice it, I am no expert in it.  However I do have an opinion.  I think it’s an “All or Nothing” type of thing… You make a move and it either works, or you are totally screwed.  Just my impression, this is probably what you need in Israel if you are the One Guy in the doorway protecting a room full of babies from the guy with a gun trying to get in.  I may be wrong.  Like I said, I’m no expert in Krav Maga.  I think I would like to take a few classes  in it and learn more.

HOWEVER…  I’m not wrong in this:  Krav Maga Shooting looks dangerous as hell and I don’t want anything to do with it, based on this video:

Continue reading Krav Maga Shooting Fail.

3 Gun Maintenance Products I use

I’m critically low on my Gun Maintenance Products. I have 3 products that I use and really prefer over everything else.  I need to order some of each.

First is LUBRICATION. There is nothing better on the planet – NOTHING – that can touch the lubrication of SLIPSTREAM STYX from Crusader Weaponry. This stuff is beyond slick. I use it in any mechanism that needs some lubricant. This is also what I use when I am reassembling things… such as firearm internals, revolvers to rifles, and any other mechanical device. It doesn’t gum up, doesn’t dry out, and it protects those internals better than anything else I’ve ever found. It was designed for this purpose… for marine conditions. Salt Water conditions. So it can handle humidity, keeps your weapon operating in the worst conditions. This stuff works on any mechanism and I used it all the time on my motorcycles, inside cables and levers for super slick controls.

Second is MPRO-7 Cleaner. This is a full synthetic cleaner unlike most others. It’s more of an astringent than a solvent. So you spray it on, and wipe it off, done. Work great on the inside of your bore, exterior wipe downs, and deep detailed cleaning. I also like that it doesn’t strip the metal completely bare… it leaves a thin film on the parts that is neither oily or sticky… just… smooth and clean. I don’t know how to describe it better than that. Let’s just say – you should use this stuff too. Get it in the pump-spray bottle, and you will love it. It also works well on cleaning motorcycles.

The Third product that I’ve come to really like, and need more of now, is FIREClean. Abe and Dave of DNA Guns turned me on to this stuff last year. It’s a CLP. It cleans and it lubes very well for a CLP. I usually don’t like CLP’s. But I like this stuff… You see, I’ve found that living in the Coastal Carolina area, the humidity here combined with the ocean’s salt spray that gets caught in the air and gives the air that nice coastal smell that I love – is actually quite harmful to firearms. And considering I really don’t care for stainless steel too much – I’m always wiping my guns down to make sure they remain protected. When I first came here, every month I was wiping off a thin layer of orange dust… the beginnings of rust. FIREclean stopped that. It leaves the guns with a nice protective coating… a nice oiled finish that doesn’t feel oily but protects the guns.

Some time ago I stripped the black coatings off my Becker Combat Bowie and my Becker Companion knives. This leaves a bare high carbon steel blade… that will corrode if you even look at it sideways. You see, I use my Tactical Knives when I cook and that Becker BK9 Combat Bowie is my main cooking knife now. I didn’t like it before because that black coating didn’t let it slice very well. It added a lot of drag. Stripping the coating has let it slice meats very cleanly. It’s fantastic. It’s also bare high carbon steel, so it needs protection. FIREclean is perfect for this. I’ll use the knife and as soon as I’m done, I’ll wash it off with hot soap and water, and then I’ll rub a drop of FIREclean on each side of the blade and spine to protect it until my next cook.  So until Becker/KA-BAR makes a more stainless version of the BK9 – I’ll continue to use Fireclean on it and on all my guns.

 

Build the Want

You’ve got to look at the firearms like how Hooter’s uses their lovely girls. The girls are what brings the guys in, they are not making any money from the girls themselves. Stay with me here. You have a store full of Merch. For most Gun Stores most everything else in that store is a higher Margin item than most every gun you have in inventory.

Continue reading Build the Want

Current Top 1911 Picks

My current picks for the best production 1911’s you can buy.   I’m going to roll with some specific guns and give some more details.  But following the recent AR-15 article pattern, I’m going to stick with regular production 1911’s and not touch on Custom and Semi-Custom.  Otherwise this list would be all about Nighthawk, Ed Brown, Les Baer, and Wilson Combat.

1.  Springfield Armory:  I’m putting Springfield as a top choice because their guns are consistently well above par, and their customer service just might be The Best in the entire gun industry.  Their policy is that they want you to be happy with your gun.  So you can buy a Springfield without hesitation.   Any complaints I have heard about Springfield usually involved the person having some extreme form of Unrealistic Expectations.  “I had a problem with my GI Model so I think Springfield should give me a TRP!  With a 3 day turn around!”  That kind of thing.
Picking 3 guns out of their line up, the TRP, the MC Operator, and the Champion LW Operator.  (Champion being Springfield lingo for “Commander”)   I would really like to see Springfield do a “CCO” type pistol, and Loaded LW Commander, er… Champion.
As some do not know,  MARSOC was buying and using the Springfield MC Operators for years and years before Colt snagged the contract.  Considering Colt’s new CEO is a former Marine General… Hmmm… I’m sure that contract award was completely legit.

2.  SIG.  SIG really hit the ground running making just what could be best overall 1911’s you can buy.  Problem with them though, is that they departed from tradition with a sharp turn.  Non traditional external dimensions/profiles, with external extractors.   Then they came out with their “Tradition” series – which does look like a regular 1911, but still has that exterior extractor.    However, these guns are so good… I just love them.  Very much so.  Their C3 and RCS are amazing CCW guns.  And this gun here…. It hits all the right buttons.  Make this a Commander sized, SIG.  Please.   You can’t go wrong with a SIG 1911.

3.  PARA USA.  It’s not a secret that I’ve just never really cared for Para’s guns.  But ever since Para Ordinance became Para USA, they have been making huge strides.  Their LDA trigger system, I still don’t care for.  If you like it, that’s fine.  I just don’t.  However their regular 1911’s… They have evolved into guns that are just excellent.  Their new Black Ops 1911 is unquestionably a fine 1911 handguns by any measure.  But it’s their Elite series that I really dig.  Simple, no front slide serrations… and this one is almost perfect.   Just please, get rid of that fiber optic FSP.  I’ll take a regular tritium FSP, thank you.  I’ve talked with some of the guys from PARA USA, and they are taking their guns very seriously.  They want to be the best.  And you know what?  They keep on this road, they sure will be.  I’m liking where they are going.

4.  Remington’s 1911 R1.  This comes as a surprise to me… but Remington’s R1 family of 1911’s are just flat out excellent.  All of Remington’s problems do not exist in or effect their 1911’s.  And they are offering these well built and solid 1911’s at extremely reasonable prices.   They make one that I would be very tempted to add to my own collection.  Tell me that isn’t just gorgeous.  Remington is using a very good steel alloy, and are sporting very nice finishes.
Now if they could just put this attention to detail into the Marlin Lever Actions – I’d be a happy happy Ogre.

5.  STI.  Specifically, STI’s Lawman 4.0, and the Nitro 10.   I favor the Single Stacks, and I favor the guns that use the bushings… but that Nitro 10 is just too cool, so I can forgo the bushing requirement.

6.  Dan Wesson.  Because Dan Wesson.   Their Bobtail Commanders are probable the most FLAWLESS 1911’s I’ve ever seen that didn’t cost more than a good used car.   Their 10mm Razorback is just too damn good.   But the ones to really look hard at, are the Valor Black and the CCO.   Perfection.   Where is the Valor Black Commander though?  Oh, and hey, CZ USA – Make these in 10mm as well.  I don’t really dig the Titan 10, because I don’t hunt Vampires, professionally, so I don’t need all the race-gun hints.  I want a clean and simple 1911, in 10mm… that’s not stainless.

Here’s what I look for in a 1911:  Simplicity and understated elegance.  I don’t like bushingless bull barrels.  I don’t like full length guide rods.  I really don’t even particularly care for ambi-safeties.  And the one thing I really don’t like – but they are almost universal… The Novak style ramped rear sights.  But I can live with it.   I will also stay away from anything that even resembles a “Series 80”.  I prefer Commander length barrels.  The 4″ to 4.25″ barrel lengths.  They balance just right to me.  I do prefer if I can get it, the light weight frames, but will take solid steel happily.  I also do not like extended slide releases and safety levers.  The “Tear Drop” style safety lever is my favorite.    I do prefer a bobbed hammer or commander style hammer, followed up with a nice wide high ride beaver-tail.  Those work for me.

One to keep an eye on:  Rock Island Armory is getting better and better, not every year, but every day.  They are like the Kia Motors of 1911’s… they used to be cheap and laughable, but now they will make you turn your head, “What is that?  THAT’s a Kia?!?”  RIA is having that same effect.  While not one of my top choices now, they could be at some point in the future sooner than anyone could expect.